Specifications

Chapter 3 – Status Control Commands
Multi-Tech Systems, Inc. AT Commands for EDGE (E1) Modems (S000474A) 56
<adnEntry>
ADN phonebook record number on the SIM.
<adnNumber>
Phone number. For further details see AT+CPBR.
<adnType>
Address type, for further details see AT+CPBR.
145 Dialing string <adnNumber> includes international access code character '+'.
209 Dialing string <adnNumber> contains printable non-alphabetic non-digit characters saved with the
number string.
129 otherwise
<adnText>
Text assigned to a phone number. For further details see AT+CPBR.
<vmCounter>
If delivered by the network: Number of new voice messages sent as part of the Voice Message Waiting
Indicator. Refer to <indDescr>.
<eonsOperator>
Operator in format which depends on the type associated to the operator name. Refer to <indValue>.
<servProvider>
Service Provider Name according to the status settings (SIM Service No. 17) in the SIM Service Table
(SST) of the SIM.
<nitzUT>
Universal Time delivered as part of the “nitz” Indicator. Refer to <indDescr>.
<nitzTZ>
Time Zone delivered as part of the “nitz” Indicator. Refer to <indDescr>.
<nitzDST>
Adjustment for Daylight Saving Time as part of the “nitz” Indicator. Refer to <indDescr>.
Example of Activation and Use of Indicator “Audio”:
AT^SIND=”audio”,1 You register the indicator “audio”.
^SIND: audio,1,0
OK
AT+CMER=2,,,2 You activate the Indicator Event Report with AT+CMER.
OK A set of all registered URCs is presented. (Please note that the example
includes the indicators registered due to the power-up default settings of
AT+CIND.)
+CIEV: signal,0
+CIEV: service,1
+CIEV: sounder,0
+CIEV: message,1
+CIEV: call,0
+CIEV: roam,0
+CIEV: smsfull,0
+CIEV: rssi,4
+CIEV: audio,0
ATD030123456 You make a call.
OK
+CIEV: audio,1
+CIEV: sounder,1
+CIEV: call,1
+CIEV: signal,0
+CIEV: sounder,0
ATH You hang up.
OK
+CIEV: call,0
+CIEV: rssi,3
+CIEV: audio,0
+CIEV: signal,0
+CIEV: rssi,4