Specifications

Chapter 3 – Status Control Commands
Multi-Tech Systems, Inc. AT Commands for EDGE (E1) Modems (S000474A) 51
3.3 AT^SIND Extended Indicator Control
Description: Designed for extended event indicator control AT^SIND
• offers greater flexibility than the standard command AT+CIND,
• offers several extra indicators,
• can show the current status of all indicators supported by AT+CIND and AT^SIND,
• can be used to register or deregister the indicators of both commands,
• displays all indicator event reports via “+CIEV” URCs.
Presentation mode of the generated URCs is controlled via AT+CMER.
The AT^SIND read command provides a list of all indicators supported by AT+CIND and
AT^SIND. Each indicator is represented with its registration mode and current value.
The AT^SIND write command can be used to select a single indicator in order to modify its
registration and to view the current value.
Syntax: Test Command: AT^SIND=?
Responses: ^SIND: (<indDescr>, list of supported <indValue>s)[, (<indDescr>, list of
supported <indValue>s)[,...]], (list of supported <mode>s)
OK
Read Command: AT^SIND?
Responses: ^SIND: <indDescr>, <mode>, <indValue>
[^SIND: <indDescr>, <mode>, <indValue>]
…
In case of <indDescr>="eons"
^SIND: "eons", <mode>, <eonsOperator>, <servProvider>
In case of <indDescr>="nitz"
^SIND: "nitz", <mode>, <nitzUT>, <nitzTZ>, <nitzDST>
In case of <indDescr>="Ista"
^SIND: "Ista", <mode>, <1sstaLevel>
OK
ERROR
+CME ERROR: <err>
Write Command: AT^SIND=<indDescr>, <mode>
Responses: ^SIND: <indDescr>, <mode>, <indValue>
In case of: <indDescr>=”eons” and <mode>=2
^SIND: "eons", <mode>, <indValue>, <eonsOperator>, <servProvider>
In the case of: <indDescr>="nitz" and <mode>=2
^SIND: "nitz", <mode>, <nitzUT>, <nitzTZ>, <nitzDST>
OK
Write Command: AT^SIND: <indDescr>, <mode>
Responses: ERROR
+CME ERROR: <err>
Write Command: AT^SIND: "Ista", <mode>[, <1staLevel>]
Responses: ^SIND: "Ista", <mode>[, <1staLevel>]
OK
ERROR
+CME ERROR: <err>
Unsolicited Result Codes:
URC 1
Format of the standard indicator:
+CIEV: <indDescr>, <indValue>
Value related to an indicator has changed.
URC 2
Format of the "adnread" indicator issued when accessing the ADN phonebook records stored on the SIM:
+CIEV: <indDescr>, <adnEntry>, <adnNumber>, <adnType>, <adnText>
+CIEV: <indDescr>, "READY"
One URC is issued for every used Abbreviated Dialing Number (ADN) phonebook record. After the last record
of the ADN phonebook was read, a URC with "READY" tag signals end of processing.
URC 3
Format of the Voice Message indicator, if the number of waiting messages is delivered by the network:
+CIEV: <indDescr>, <indValue>, <vmCounter>
If the number of waiting messages is not delivered the standard indicator applies.