Specifications

Chapter 14 – SIM Application Toolkit (SAT) Commands
Multi-Tech Systems, Inc. AT Commands for EDGE (E1) Modems (S000474A) 245
14.3 AT^SSTGI SAT Get Information
Description: This command is used upon receipt of an URC “^SSTN” to request the parameters of the
Proactive Command. Then the TA is expected to acknowledge the AT^SSTGI response with
AT^SSTR to confirm that the Proactive Command has been executed.
AT^SSTR will also provide any user information; e.g., a selected menu item.
The Proactive Command type value specifies to which “^SSTN” the command is related.
Syntax: Test Command: AT^SSTGI=?
Response: ^SSTGI:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read Command: AT^SSTGI?
Response: ^SSTGI: <state>, <cmdType>
OK
Write Command: AT^SSTGI=<cmdType>
Response: OK
ERROR
ERROR: <err>
Parameters:
<state> The Multi-Tech wireless device Remote-SAT interface states
0 RESET
1 OFF
2 IDLE
3 PAC
4 WAIT
<cmdType> Related Proactive Command
Notes:
• This command is not PIN protected.
• This command is supported in airplane mode.
14.4 AT^SSTR SAT Response
Description: The TA is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the
Proactive Command has been executed. AT^SSTR will also provide any user information; e.g., a
selected menu item.
Syntax: Test Command: AT^SSTR=?
Response: ^SSTR:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read Command: AT^SSTR?
Response: ^SSTR: <state>, <cmdType>
OK
Write Command: AT^SSTR=<cmdType>, <status>[, <inputNumber>][, <inputString>]
Response: OK
Parameters:
<state> The Multi-Tech wireless device Remote-SAT interface states
0 RESET
1 OFF
2 IDLE
3 PAC
4 WAIT
<cmdType> Number related to Proactive Command or event type according to GSM 11.14.
<status> Command status return regarding the type of action that has taken place; e.g., action performed
by the user. Values are in accordance with GSM 11.14.
<inputNumber> Response number entered by user.
<inputString> Response string entered by user.
<statAddInfo> Optional additional command status; for possible values refer to GSM 11.14.
Notes:
• This command is not PIN protected.
• This command is supported in airplane mode.