Specifications

Chapter 11 – GPRS Commands
Multi-Tech Systems, Inc. AT Commands for EDGE (E1) Modems (S000474A) 207
11.15 AT^SGAUTH Set Type of Authentication for PPP
Connection
Syntax: Test Command: AT^SGAUTH=?
Response: ^SGAUTH: (list of supported <auth>s)
OK
ERROR
+CME ERROR: <err>
Read Command: AT^SGAUTH?
Response: ^SGAUTH: <auth>
OK
ERROR
+CME ERROR: <err>
Write Command: AT^SGAUTH=<auth>
Response: OK
ERROR
+CME ERROR: <err>
Parameters:
<auth> Indicates types of supported authentication.
0 none
1 PAP Default. This is the factory default value; it will be restored to '1' with AT&F. It is also a
powerup default which is not stored at power down.
2 CHAP
3 MS-CHAP-V1, CHAP and PAP
Notes:
• This command is not PIN protected.
• This command is supported in airplane mode.