Specifications

Chapter 10 – Internet Service Commands
Multi-Tech Systems, Inc. AT Commands for EDGE (E1) Modems (S000474A) 184
10.14.13 Retrieving Email (URC Mode)
This example uses the service profile described in Section 10.14.12.
at^siso=1 Open the service that was created to retrieve email number 2
from the POP3 server.
OK
^SISR: 1, 1 The "^SISR" indicates that data is available for reading.
at^sisr=1,500 Try to read 500 bytes.
^SISR: 1, 500 Command response indicates that 500 bytes will be
transferred, i.e. there will be no other URC since the requested
length equals the confirmed length.
Return-Path: <[e-mail]>
X-Original-To: [e-mail]
Delivered-To: [e-mail]
Received: from 10.10.0.132 (unknown [10.10.0.132])
by testdomain.com (Postfix) with SMTP id 379321D004
for <[e-mail]>; Tue, 20 Dec 2005 08:00:07 +0100 (CET)
To: [e-mail]
Cc:
From: [e-mail]
Subject: Test Mail
Message-Id: <[e-mail] >
Date: Tue, 20 Dec 2005 08:00:07 +0100
OK
at^sisr=1,500 Try to read another 500 bytes.
at^sisr=1,78 Command response indicates that only 78 bytes will
transferred.
(CET)
X-UIDL: &lL"!(Z6"!^cl!!1+%"!
Status: RO
Hello Tom! Bye Bye Tom!
. Dot indicates end of mail according to RFC 2821.
OK
^SISR: 1, 2 Parameter <urcCauseId> of the "^SISR" URC confirms that all
data is transferred successfully.
at^sisc=1 Close the service.
OK