User manual

FUN BILLBOARD DEMO USER MANUAL

d. USB Serial port

e. USB cable DCU-10, 11 or 12

f. … or for other entries that might be related to your modem

• If you are not sure, disconnect and reconnect your modem or mobile phone while

looking at the section “Ports (Com & LPT)”. The entry you are interested in should

first disappear from the list and then appear again on the list.

• If you are not able to set up the COM port in your Fun Billboard system using the

data from the section “Ports (Com & LPT)”, please unfold the section "Modems"

and find the port setting of your modem

Now you can set up the COM port in your FUN BILLBOARD DEMO. Just go to Modem and

SIM card settings and choose the right port:

Fig. 5. Modem and SIM card settings dialog window

Other settings

Most of the supported GSM modems and mobile phones should work with the following

port settings:

Baud rate: 115200 or 460800 or 921600

Data bits: 8

Parity: none

Stop bits: 1

Flow control: hardware

If the above setting does not work, try this one:

Baud rate: 115200 or 460800 or 921600

Data bits: 8

Parity: none

Stop bits: 1

Flow control: none