Specifications

Chapter 2 – Configuration Commands
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 35
Example
Usage of “URC/Ringline” and “URC/Datamode/Ringline”:
AT+CSCS=”GSM” Switch to GSM character set.
OK
AT^SCFG? Query all parameters.
...
^SCFG:”URC/Datamode/Ringline”,”off” While the TA-TE link is reserved URCs will be indicated by BREAK.
^SCFG:”URC/Ringline”,”local” URCs on this interface will be indicated by Ring line associated to the
interface (e.g. RING0 for ASC0).
...
OK
AT^SCFG=”URC/Datamode/Ringline”,”on”
^SCFG:”URC/Datamode/Ringline”,”on” While the TA-TE link is reserved URCs will be indicated by an
activated “local” Ring line.
OK
AT^SCFG=”URC/Ringline”,”asc0”
^SCFG:”URC/Ringline”,”asc0” URCs on this interface will be indicated by an activated RING0 no
matter whether or not the TA-TE link is reserved.
OK
AT^SCFG=”URC/Datamode/Ringline”,”off”
^SCFG:”URC/Datamode/Ringline”,”off” URCs on this interface will be indicated by an activated RING0 if the
TA-TE link is not reserved and by BREAK if the TA-TE link is reserved.
OK
AT^SCFG=”URC/Ringline” Disable any Ring line indication for URCs on this interface.
^SCFG:”URC/Ringline”,”off”
OK