Specifications

Chapter 2 – Configuration Commands
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 26
Parameter Description:
<errMode>
0 Disable result code; i.e., only “ERROR” will be displayed.
1 Enable error result code with numeric values.
2 Enable error result code with verbose (string) values.
Example:
To obtain enhanced error messages it is recommended to choose <errMode>=2:
AT+CMEE=2
OK
2.12.1 CME/CMS Error Code Overview
Table 2.4: General “CME ERROR” Codes (GSM 07.07)
<err> Code Text (if AT+CMEE=2)
0 phone failure
1 no connection to phone
2 phone-adapter link reserved
3 Operation not allowed
4 Operation not supported
5 PH-SIM PIN required
6 PH-FSIM PIN required
7 PH-FSIM PUK required
10 SIM not inserted
11 SIM PIN required
12 SIM PUK required
13 SIM failure
14 SIM busy
15 SIM wrong
16 Incorrect password
17 SIM PIN2 required
18 SIM PUK2 required
20 Memory full
21 Invalid index
22 not found
23 Memory failure
24 text string too long
25 invalid characters in text string
26 dial string too long
27 invalid characters in dial string
30 no network service
31 Network timeout
32 Network not allowed emergency calls only
40 Network personalization PIN required
41 Network personalization PUK required
42 Network subset personalization PIN required
43 Network subset personalization PUK required
44 service provider personalization PIN required
45 service provider personalization PUK required
46 Corporate pe sonalization PIN required
47 Corporate personalization PUK required
48 Master Phone Code required
100 unknown
132 service option not supported
133 requested service option not subscribed
134 service option temporarily out of order
126 Operation temporary not allowed
257 call barred
258 phone is busy
259 user abort
260 invalid dial string
261 ss not executed
262 SIM blocked
263 Invalid Block