Specifications

Chapter 20 – Summary Tables
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 253
Command Description Section Page
ATD*99# Request GPRS Service 11.18 163
ATD><mem><n> Mobile Originated Call Using Specific Memory and Index Number 7.4 77
ATD><n> Mobile Originated Call from Active Memory Using Index Number 7.5 78
ATD><str> Mobile Originated Call from Active Memory Using Corresponding Field 7.6 78
ATDI Mobile Originated Call to ISDN Number 7.7 79
ATDL Redial Last Number Used 7.8 79
ATE Enable Command Echo 4.5 52
ATH Disconnect Existing Connection 7.9 79
ATH Manual Rejection of a Network Request for PDP Context Activation 11.20 164
ATI Display Product Identification Information 6.1 71
ATL Set Monitor Speaker Loudness 17.2 213
ATM Set Monitor Speaker Mode 17.3 213
ATO Switch from Command Mode to Data Mode / PPP Online Mode 7.17 83
ATP Select Pulse Dialing 7.29 92
ATQ Set Result Code Presentation Mode 2.4 20
ATS0 Automatic Response to a Network Request for PDP Context Activation 11.21 165
ATS0 Set Number of Rings before Automatically Answering a Call 7.12 81
ATS10 Set Disconnect Delay after Indicating the Absence of Data Carrier 7.16 83
ATS18 Extended Call Release Report 3.5 49
ATS3 Set Command Line Termination Character 19.2 232
ATS4 Set Response Formatting Character 19.3 232
ATS5 Write Command Line Editing Character 19.4 233
ATS6 Set Pause before Blind Dialing 7.13 82
ATS7 Set Number of Seconds to Wait for Connection Completion 7.14 82
ATS8 Set Number of Seconds to Wait for Comma Dialing Modifier 7.15 82
ATT Select Tone Dialing 7.30 92
ATV Set Result Code Format Mode 2.5 21
ATX Set CONNECT Result Code Format and Call Monitoring 2.6 22
ATZ Set all Current Parameters to User Defined Profile 2.8 22