Specifications

Chapter 20 – Summary Tables
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 245
20.5 AT Command Settings Storable with AT&W
Table 20.7: Settings Stored to User Profile on ASC0 / MUX Channel 1.
AT Command Stored Parameters
Configuration Commands
ATQ <n>
ATV <value>
ATX <value>
AT \ V <value>
AT+CMEE <errMode>
Status Control Commands
ATS18 <n>
Serial Interface Control Commands
AT\Q <n>
AT&C <value>
AT&D <value>
AT&S <value>
ATE <value>
AT+ICF <format>, <parity>
AT+IFC <TEflowcontrol>, <TAflowcontrol>
AT+ILRR <value>
AT+STPB <n>
Call-Related Commands
ATS0 <n>
ATS6 <n>
ATS7 <n>
ATS8 <n>
ATS10 <n>
AT+CBST <speed>, <name>, <ce>
AT+CRLP <iws>, <mws>, <T1>, <N2>
AT^SLCC <n>
AT+CR <mode>
AT+CRC <mode>
Network Service Commands
AT+COPS <format>
AT+CREG <n>
Supplementary Service Commands
AT^SACM <n>
AT+CLIP <n>
GPRS Commands
ATS0 <n>
FAX Commands
AT+FCLASS <n>
Short Message Service (SMS) Commands
AT+CMGF <mode>
AT+CNMI <mode>, <mt>, <bm>, <ds>, <bfr>
AT+CSCB <mode>
AT+CSDH <show>
AT+CSMS <service>
AT^SMGO <n>
SIM-Related Commands
AT^SCKS <mode>
AT^SSET <n>
Miscellaneous Commands
ATS3 <n>
ATS4 <n>
ATS5 <n>