Specifications

Chapter 20 – Summary Tables
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 236
Table 20.2 Abbreviations of Codes and Parameters used in Star-Hash Network Commands Table Above
Abbreviation Meaning Value
ZZ Type of supplementary services:
Barring services
All services
330
Not specified
DN Dialing number String of digits 0-9
BS Basic service equivalent to parameter class:
Voice
FAX
SMS
SMS+FAX
Data circuit asynchron
Data circuit synchron
dedicated PAD access
dedicated Packet access
Data circuit asynchron+PAD
Data circuit synchron+Packet
Data circuit asynchron+synchron+Packet+PAD
All Services
11
13
16
12
25
24
27
26
21
22
20
--
T Time in seconds In contrast to AT+CCFC,
parameter T has no default
value. If T is not specified, an
operator defined default or the
last known value may be used,
depending on the network
operator.
PW Password --
C Character of TE character set (e.g., astericks,
hash or digit in case of USSD, or digits in case of
held calls or multiparty calls)
--
Table 20.3 Star-Hash Command Response Parameters
Parameter Meaning
<m> Mode: 0 = not active, 1 = active
<n> Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
<status> Status: 0 = not active, 1 = active
<class> Represents BS = basic service, refer to AT+CCFC, AT+CLCK
<fac> Facility lock, refer to AT+CLCK
<reason> Call forwarding reason
For exact specification of format and parameters for Star-Hash commands refer to GSM 02.04, Table 3.2 and
GSM 02.30, Annex C.
Table 20.4 Star-Hash Commands for Supplementary Services
Star-Hash Code Abbreviations in Table 20.1 Functionality
* act Activate (except for CLIR, see list above)
** reg Register and activate
*# int Check status (interrogate)
# deact Deactivate (except for CLIR, see list above)
## eras Unregister and deactivate