Specifications
Chapter 15 – SIM Application Toolkit (SAT) Commands
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 200
15.3 AT^SSTGI SAT Get Information
Description: This command is used upon receipt of an URC “^SSTN” to request the parameters of the
Proactive Command. Then the TA is expected to acknowledge the AT^SSTGI response
with AT^SSTR to confirm that the Proactive Command has been executed. AT^SSTR will
also provide any user information; e.g., a selected menu item.
The Proactive Command type value specifies to which “^SSTN” the command is related.
Test Command Syntax: AT^SSTGI=?
Response: ^SSTGI:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read Command Syntax: AT^SSTGI?
Response: ^SSTGI: <state>, <cmdType>
OK
Write Command Syntax: AT^SSTGI=<cmdType>
Response: OK
Parameter Descriptions:
<state>
The Multi-Tech wireless modem Remote-SAT interface states
0 RESET
1 OFF
2 IDLE
3 PAC
4 WAIT
<cmdType>
Related Proactive Command
15.4 AT^SSTR SAT Response
Description: The TA is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm
that the Proactive Command has been executed. AT^SSTR will also provide any user
information; e.g., a selected menu item.
Test Command Syntax: AT^SSTR=?
Response: ^SSTR:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read Command Syntax: AT^SSTR?
Response: ^SSTR: <state>, <cmdType>
OK
Write Command Syntax: AT^SSTR=<cmdType>, <status>[, <inputNumber>][, <inputString>]
Response: OK
Parameter Description:
<state>
The Multi-Tech wireless modem Remote-SAT interface states
0 RESET
1 OFF
2 IDLE
3 PAC
4 WAIT
<cmdType>
Number related to Proactive Command or event type according to GSM 11.14.
<status>
Command status return regarding the type of action that has taken place; e.g., action performed by the user.
Values are in accordance with GSM 11.14.
<inputNumber>
Response number entered by user.
<inputString>
Response string entered by user.