Specifications

Chapter 11 – GPRS Commands
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371B) 156
<peak>
Peak throughput class (in octets per second).
0 network subscribed value. Default
1 Up to 1 000 (8 kbit/s).
2 Up to 2 000 (16 kbit/s).
3 Up to 4 000 (32 kbit/s).
4 Up to 8 000 (64 kbit/s).
5 Up to 16 000 (128 kbit/s).
6 Up to 32 000 (256 kbit/s).
7 Up to 64 000 (512 kbit/s).
8 Up to 128 000 (1024 kbit/s).
9 Up to 256 000 (2048 kbit/s).
<mean>
Mean throughput class(in octets per hour).
0 Network subscribed value. Default.
1 100 (~0.22 bit/s)
2 200 (~0.44 bit/s)
3 500 (~1.11 bit/s)
4 1 000 (~2.2 bit/s)
5 2 000 (~4.4 bit/s)
6 5 000 (~11.1 bit/s)
7 10 000 (~22 bit/s)
8 20 000 (~44 bit/s)
9 50 000 (~111 bit/s)
10 100 000 (~0.22 kbit/s)
11 200 000(~0.44 kbit/s)
12 500 000(~1.11 kbit/s)
13 1 000 000 (~2.2 kbit/s)
14 2 000 000 (~4.4 kbit/s)
15 5 000 000 (~11.1 kbit/s)
16 10 000 000 (~22 kbit/s)
17 20 000 000 (~44 kbit/s)
18 50 000 000 (~111 kbit/s)
31 best effort
<PDP_type>
Packet Data Protocol Type
“IP“
Notes:
• If parameters are not defined, the parameter default values depend on the HLR-stored subscribed default values.
• Definitions of parameters in GSM 02.60 and GSM 03.60 paragraph 15.2 “Quality of Service Profile”.
Example:
If some of the QoS parameters are omitted, they will keep their current value (or the default value if not specified).
For example:
AT+CGDCONT=1,”IP”
OK
AT+CGQMIN=
OK
AT+CGQMIN?
OK
AT+CGQMIN=1,0
OK
AT+CGQMIN?
+CGQMIN:1,0,0,0,0,0
OK
AT+CGQMIN=1,0,0,0,1
OK
AT+CGQMIN?
+CGQMIN:1,0,0,0,1,0
OK
AT+CGQMIN=1,1
OK
AT+CGQMIN?
+CGQMIN:1,1,0,0,1,0
OK