Specifications


3GPPTS27.007ATCOMMANDS

HSPA+ATCommandsReferenceGuide 90

Notes
 When<auxmode>=1,the<time>formatof+CCLKand+CALAis"yy/MM/dd,hh:mm:ss+zz".When<auxmode>=2
itis"yyyy/MM/dd,hh:mm:ss+zz".
SettingTimeForm at+CSTF
Thiscommandsetsthetimeformatofthetimeinformationpresentedtotheuser,whichisspecifiedbyuseofthe
<mode>parameter.The<mode>affectsthetimeformatonthephonedisplayanddoesnotaffectthetime
formatoftheATcommandserialinterface,soitnotactuallynotused
.
Readcommandreportsthecurrentlyselected<mode>intheformat:
+CSTF:<mode>
Testcommandreportsthesupportedrangeofvaluesfor<mode>.
Syntax
Command Commandtype
AT+CSTF=[<mode>]
AT+CSTF? Read
AT+CSTF=? Test
ParametersandValues
<mode>
1 HH:MM24hourclock.Default:1.
2 HH:MMa.m./p.m.
TimeZoneReporting+CTZR
Thiscommandenablesanddisablesthetimezonechangeeventreporting.IfthereportingisenabledtheMT
returnstheunsolicitedresultcode+CTZV:<tz>wheneverthetimezoneischanged.
Readcommandreportsthecurrentlyselected<onoff>intheformat:
+CTZR:<onoff>
Testcommandreportsthesupportedrangeofvaluesforparamete
r<onoff>
Syntax
Command Commandtype
AT+CTZR=<onoff>
AT+CTZR? Read
AT+CTZR=? Test
ParametersandValues
<onoff>
0 Disabletimezonechangeeventreporting.Default:0.
1 Enabletimezonechangeeventreporting.