Specifications


3GPPTS27.007ATCOMMANDS

HSPA+ATCommandsReferenceGuide 72

Syntax
Command Commandtype
AT+CCUG=[<n>[,<index>[,<info>]]] Set
AT+CCUG? Read
AT+CCUG=? Test
ParametersandValues
<n> 
0 DisableCUGtemporarymode.Default:0.
1
EnableCUGtemporarymode:itenablestocontroltheCUGinformationontheair
interfaceasadefaultadjustmentforallfollowingoutgoingcalls.
<index> 
0‐9 CUGindex.
10 Noindex(preferentialCUGtakenfromsubscriberdata).Default:10.
<info> 
0 Noinformation.Default:0.
1 Sup
pressOutgoingAccess(OA).
2 SuppresspreferentialCUG.
3 SuppressOAandpreferentialCUG.
Notes
 Reference:3GPPTS27.007.
Selectionofpreferred PLMNlist+CPLS
ExecutecommandselectsalistofpreferredPLMNsintheSIM/USIM.
Readcommandreturnstheselected PLMNselector<list>fromtheSIM/USIM.
Testcommandreturnsthewholeindexrangesupported<list>sbytheSIM/USIM.
Syntax
Command Commandtype
AT+CPLS=<list> Execute
AT+CPLS? Read
AT+CPLS=? Test
ParametersandValues
<list> 
0
UsercontrolledPLMNselectorwithAccessTechnologyEFPLMNwAcT,ifnotfound
intheSIM/UICCthenPLMNpreferredlistEFPLMNsel.Thisfileisonlyavailablein
SIMcardorGSMapplicationselectedinUICC.
1 OperatorcontrolledPLMNselectorwithAccessTechnologyEFOPLMNwAcT.
2 HPLMNselectorwithAccessTechnologyEFHPLMNwAcT.