Specifications


3GPPTS27.007ATCOMMANDS

HSPA+ATCommandsReferenceGuide 64

<cmd> 
0 Disable.
1 Enable.
2 Querystatus.
3 Registration.
4 Erasure.
<number> Stringtype,phonenumberofforwardingaddressinformatspecifiedby<type>
<type> Typeofaddressoctetinintegerformat.
129 Nationalnumberingscheme.
145 Internationalnumberingscheme.Containsthecharacter"+".
<class>
Sumofintegerseachrepresentingaclassofinformationtowhichthecommand
refers.
1 Voice(telepho
ny).
2 Data.
4 Fax(facsimileservices).
7 Voice+data+fax.Default:7.
8 Shortmessageservice.
16 Datacircuitsync.
32 Datacircuitasync.
64 Dedicatedpacketaccess.
128 DedicatedPADaccess.
<time>
Timeinsecondstowaitbeforecallisforwar
ded;itisvalidonlywhen<reason>
"noreply"isenabled(<cmd>=1)orqueried(<cmd>=2)
1‐30 Automaticallyroundedtoamultipleof5seconds.Default:20.
Note:When<cmd>=2andcommandsuccessful,itreturns:
+CCFC:<status>,<class1>[,<number>,<type>[,,,<time>]][<CR><LF>
+CCFC:<status>,<class2>[,<number>,<type>[,,,<time>]][…]]

where:
<status>‐currentstatusofth
enetworkservice
0‐notactive
1‐active
<classn>‐sameas<class>
<time>‐itisreturnedonlywhen<reason>=2(“noreply”)and<cmd>=2.
TheotherparametersaredescribedintheParametersandValuessection.
Notes
 Whenqueryingthestatusofanetworkservice(<cmd>=2)theresponselinefor'notactive'case(<status>=0)is
returnedonlyifserviceisnotactiveforany<class>.
 Reference:3GPPTS27.007.