Specifications

3GPPTS27.007ATCOMMANDS


53 HSPA+ATCommandsReferenceGuide

AT+CNUM=? Test
Notes
 Reference:3GPPTS27.007
ReadOperatorNames+COPN
ExecutecommandreturnsthelistofoperatornamesfromtheMEintheformat:
+COPN:<numeric1>,<alpha1>[<CR><LF>
+COPN:<numeric2>,<alpha2>[…]]
where:
<numericn> Stringtype,operatorinnumericformat.See+COPS.
<alphan> Stringtype,operatorinlongalphanumericformat.See+COPS.
Note:
Eachoperatorcode<numericn>thathasanalphanumericequivalent<alphan>intheMEmemoryis
returned.
TestcommandreturnstheOKresultcode.
Syntax
Command Commandtype
AT+COPN Execute
AT+COPN=? Test
Notes
 Reference:3GPPTS27.007
NetworkRegistrationReport +CREG
Setcommandenablesordisablesnetworkregistrationreportsdependingontheparameter<mode>.
Readcommandreportsthe<mode>and<stat>parametervaluesintheformat:
+CREG: <mode>,<stat>[,<Lac>,<Ci>[,<AcT>]]
Note:<Lac>,and<Ci>and<AcT>arereportedonlyif<mode>=2andthemobileisregisteredonsomenetwork
cell.
Testcommandreturnstherangeofsupported<mode>.
Syntax
Command Commandtype
AT+CREG=[<mode>]
Set
AT+CREG? Read
AT+CREG=? Test