Specifications


AUDIOCOMMANDS

HSPA+ATCommandsReferenceGuide 322

#DVICFG:<config>,<samplerate>,<samplewidth>,<audiomode>,<edge>
Testcommandreportstherangeofsupportedvaluesfor:
<config>,<samplerate>,<samplewidth>,<audiomode>,<edge>
Syntax
Command Commandtype
AT#DVIEXT=<config>,[<samplerate>,[<sampleclock>,[<audiomode>,>,[<edge>]]]] Set
AT#DVIEXT? Read
AT#DVIEXT=? Test
ParametersandValues
<config> 
0 Burstmode.
1 Normalmode.Default:1.
<samplerate> 
0 Audioschedulersamplerate8KHz.Default:1.
1 Audioschedulersamplerate16KHz.
<samplewidth> 
0 16bitspersample.Default:0.
1 18bitspersample.
2 20bitspersample.
3 24bitspersample.
4 32bitspersample.
<au
diomode> 
0 Monomode.
1 Dualmono.Default:1.
<edge> 
0
Databitistransmittedonfallingedgeofclockandsampledonrisingedgeof
clock.Default:0.
1
Databitistransmittedonrisingedgeofclockandsampledonfallingedgeof
clock.
Valuesfor<e
dge>arevalidonlyinBurstMode.NormalModeis0.