Specifications

HAYESCOMPLIANTATCOMMANDS


31 HSPA+ATCommandsReferenceGuide

DTEModemInterfaceControl
CommandEchoE
Setcommandenablesordisablesthecommandecho.
Syntax
Command Commandtype
ATE[<n>] Set
ParametersandValues
<n> 
0 Disablescommandecho.
1
Enablescommandecho,hencecommandsenttothedeviceareechoedbackto
theDTEbeforetheresponseisgiven.Default:1.
Notes
 Ifparameterisomitted,thecommandhasthesamebehaviorasATE0.
 Reference:V.25ter.
QuietResultCodesQ
Setcommandenablesordisablestheresultcodes.
Syntax
Command Commandtype
ATQ[<n>] Set
ParametersandValues
<n> 
0 Enablesresultcodes.Default:0.
1 Disablesresultcodes.
2 Disablesresultcodes.Onlyforbackwardcompatibility.
Notes
 AfterissuingeitherATQ1orATQ2everyinformationtexttransmittedinresponsetocommandsisnotaffected.
 Ifparameterisomitted,thecommandhasthesamebehaviorasATQ0.
Examples
AfterissuingATQ1orATQ2
AT+CGACT=?
+CGACT: (0-1) nothing is appended to the response