Specifications


GPSATCOMMANDSSET

HSPA+ATCommandsReferenceGuide 300

UpdateTerminalInformation#LCSTER
SetcommandupdatestheterminalinformationlikeIMSI,MSISDNorIPv4address.
Syntax
Command Commandtype
AT$LCSTER=<id_type>[,<id_value>[,<pref_pos_mode>[,<tls_mode>]]] Set
ParametersandValues
<id_type> Anumber.
0 MSIDSN.
1 IMSI.
2 IPv4address.
3 Invalid.
<id_value> Astring,asdefinedin<id_type>.
<pref_pos_mode> Preferredpositionmode.
0 Defaultpositionmode.
1 Nonepreferredpositionmode.
<tls_mode> IndicatesifTLSmodeisusedbytheSET.
0 Non‐TLSmode.
1 TLSmode.Default:1.
Notes
 If<id_type>isMSISDNorIPv4addressthen<id_value>isentered.
Enable/DisableUnsolicitedResponse$LICLS
Setcommandenablesordisablesunsolicited$LICLSresponse.
Readcommandreturnsthecurrentvalueofparameter<mode>.
Testcommandreturnstherangeofvaluesforparameter<mode>.
Syntax
Command Commandtype
AT$LICLS=<mode> Set
AT$LICLS? Read
AT$LICLS=? Test