Specifications


HAYESCOMPLIANTATCOMMANDS

HSPA+ATCommandsReferenceGuide 24

V.250ATCommands
GenericModemControl
SettoFac tory‐DefinedConfigur ation&F
Executethiscommandtosettheconfigurationparameterstodefaultvaluesspecified bythemanufacturer.This
includeshardwareconfigurationswitchesandothermanufacturer‐definedcriteria.
Syntax
Command Commandtype
AT&F[<value>] Set
ParametersandValues
<value> Hardwareversion,astringofnomorethan31characters.
0 Onlythefactoryprofilebasesectionparametersaresettodefaultvalues.
1
Fullfactoryprofilerestored,thatis,thefactoryprofilebasesectionandthe
extendedsectionarerestored.
Notes
 Ifparameter<value>isomitted,thecommandhasthesamebehaviorasAT&F0.
 Reference:V.25ter.
SoftResetZ
Executethiscommandtothebasesectionofthespecifieduserprofileandtheextendedsectionofthedefault
factoryprofile.
Syntax
Command Commandtype
ATZ[<n>]
ParametersandValues
<n> Hardwareversion,astringofnomorethan31characters.
0‐1 Userprofilenumber.
Notes
 Anycallinprogressisterminated.
 Ifparameter<n>isomitted,thecommandhasthesamebehaviorasATZ0.
 Reference:V.25ter.