Specifications


CUSTOMATCOMMANDS

HSPA+ATCommandsReferenceGuide 220

#SCFG: 4,1,300,90,600,50
#SCFG: 5,1,300,90,600,50
#SCFG: 6,1,300,90,600,50
OK
SocketConfigurationExtended#SCFGEXT 
Setcommandsetsthesocketconfigurationextendedparameters
Readcommandreturnsthecurrentsocketextendedconfigurationparametersvaluesforallthesixsockets,inthe
format:
#SCFGEXT:<connId1>,<srMode1>,<dataMode1>,<keepalive1>,
<ListenAutoRsp1>,0<CR><LF>
...
#SCFGEXT:<connId6>,<srMode6>,<dataMode6>,<keepalive6>,
<ListenAutoRsp6>,0<CR><LF>
Testcommandreturnstherangeofsupportedvaluesforallthesubparameters
Syntax
Command Commandtype
AT#SCFGEXT=<conned>,<srMode>,<recvDataMode>,<keepalive>,
[,<ListenAutoRsp>[,<sendDataMode>]]
Set
AT#SCFGEXT? Read
AT#SCFGEXT=? Test
ParametersandValues
<connId> Socketconnectionidentifier.
1‐6 
<srMode> SRingunsolicitedmode.
0 Normal.Default:0.
SRING:<connId>where<connId>isthesocketconnectionidentifier
1 Dataamount.
SRING:<connId>,<recData>where<recData>istheamountofdatareceivedonthe
socketconnectionnumber<connId>
2 Dataview.
SRING:<
connId>,<recData>,<data>sameasbeforeand<data>isdatareceived
displayedfollowing<dataMode>value.
<recvDataMode> Dataviewmodeforreceiveddataincommandmode(AT#SRECVor<srMode>=2).
0 Textmode.Default:0.
1 Hexadecimalmode.
<keepalive> SettheTCPKeepalivevalueinminutes.
0 Deactivated.Default:0.