Specifications


CUSTOMATCOMMANDS

HSPA+ATCommandsReferenceGuide 194

#LANG:<lan>
Testcommandreportsthesupportedrangeofvaluesforparameter<lan>
Syntax
Command Commandtype
AT#LANG=<lan> Set
AT#LANG? Read
AT#LANG=? Test
ParametersandValues
<lan> Selectedlanguage.
“en” English.Default:“en”.
“it” Italian.
EnableRXDiversityandSetDARP#RXDIV 
ThiscommandenablesordisablestheRXdiversityandsetstheDARP.
Readcommandreportsthecurrentlyselected<DIV_enable>and<DARP_mode>parametersintheformat:
#RXDIV:<DIV_enable>,<DARP_mode>
Testcommandreportsthesupportedrangeofvaluesfor<DIV_enable>and<DARP_mode>
Syntax
Command Commandtype
AT#RXDIV=<DIV_enable>[,<DARP_mode>]
AT#RXDIV? Read
AT#RXDIV=? Test
ParametersandValues
<DIV_enable> RXdiversity.
0 DisabletheRXdiversity.
1 EnableRXdiversity.Default:1.
<DARP_mode> 
0 DARPnotsupported.
1 DARPphase1.
2 DARPphase2trafficonly.
3 DARPalwayson.Default:3.
Notes
 Thevaluessetbycommandaredirectlystoredinnon‐volatilememoryanddonotdependonthespecificCMUX
instance.
SetEncryptionAlgorithm#ENCALG
ThiscommandenablesordisablestheGSMand/orGPRSencryptionalgorithmssupportedbythemodule.