Specifications

CUSTOMATCOMMANDS


191 HSPA+ATCommandsReferenceGuide

CodecInformation#CODECINFO
Thiscommandisbothasetandanexecutecommand.
Setcommandenablesordisablescodecinformationreportsdependingontheparameter<mode>,inthe
specified<format>.
Readcommandreports<format>and<mode>parametervaluesintheformat:
#CODECINFO:<format>,<mode>
Testcommandreturnstherangeofsupported<format>and<mode>.
Syntax
Command Commandtype
AT#CODECINFO[=<format>[,<mode>]] Set
Execute
AT#CODECINFO? Read
AT#CODECINFO=? Test
ParametersandValues
<format> 
0 Numericformat.Default:0.
1 Textformat.
<mode>
0 Disablecodecinformationunsolicitedreport.Default:0.
1 Enablecodecinformationunsolicitedreportonlyifthecodecchanges.
2 Enableshortcodecinformationunsolicitedreportonlyifthecodecchanges.
If<mode>=1theunsolici tedchannelmodeinformationisreportedinthefollowingformat:
(if<format>=0)
#CODECINFO:<codec_used>,<code c_set>
(if<format>=1)
#CODECINFO:<codec_used>,<code c_set1>
[,<codec_set2>[..[,codec_setn]]]

If<mode>=2theunsolici tedcodecinformationisreportedinthefollowingformat:
#CODECINFO:<codec_used>
Thereportedvaluesaredescribedbelow.
Executecommand
Executecommandreportscodecinformationinthespecified<format>.
(if<format>=0)