Specifications


CUSTOMATCOMMANDS

HSPA+ATCommandsReferenceGuide 190

Readcommandreportsthedurationinmsofthepulsegenerated,intheformat:
#PSMRI:<x>
Testcommandreportsthesupportedrangeofvaluesforparameter<x>
Syntax
Command Commandtype
AT#PSMRI=<x> Set
#PSMRI? Read
#PSMRI=? Test
ParametersandValues
<x> RIenabling.
0 DisablesRIpinresponseforURCmessage.Default:0.
50‐1150 EnablesRIpinresponseforURCmessages.
Notes
 Thebehaviorfor#PSMRIisinvoked,onlywhenmodemisinsleepmode(AT+CFUN=7)
 ThevaluesetbycommandisstoredintheprofileextendedsectionanddoesnotdependonthespecificAT
instance.
 WhenRINGsignalfromincomingcall/SMS/socketlistenisenabled,thebehaviorfor#PSMRIisignored. 
ReportConcatenatedSMSIndexes#CMGLCONCINDEX
ThecommandreportsalineforeachconcatenatedSMScontaining:
#CMGLCONCINDEX:N,i,j,k,...
where
N ThenumberofsegmentsthatformthewholeconcatenatedSMS.
I,j,k TheSMSindexesofeachSMSsegment,0ifsegmenthasnotbeenreceived.
IfnoconcatenatedSMSispresentontheSIM,onlyOKresultcodeisreturned.
TestcommandreturnsOKresultcode.
Syntax
Command Commandtype
AT#CMGLCONCINDEX
AT#CMGLCONCINDEX=? Test
Examples
at#cmglconcindex
#CMGLCONCINDEX: 3,0,2,3
#CMGLCONCINDEX: 5,4,5,6,0,8
OK