Specifications


CUSTOMATCOMMANDS

HSPA+ATCommandsReferenceGuide 186

Syntax
Command Commandtype
AT#SKIPESC=[<mode>] Set
AT#SKIPESC? Read
AT#SKIPESC=? Test
ParametersandValues
<mode> 
0 Doesnotskiptheescapesequence;itstransmissionisenabled.Default:0.
1 Skipstheescapesequence;itstransmissionisnotenabled.
Notes
 IncaseofanFTPconnection,theescapesequenceisnottransmitted,regardlessofthecommandsetting.
SIMDetectionMode#SIMDET
SetcommandspecifiestheSIMDetectionmode.
ReadcommandreturnsthecurrentlyselectedSIMDetectionModeintheformat:
#SIMDET:<mode>,<simin>
where:
<mode> SIMdetectionmode.
<simin> SIMINpinrealstatus.
0 SIMnotinserted.
1 SIMinserted.
Testcommandreportsthesupportedrangeofvaluesforparameter<mode>.
Syntax
Command Commandtype
AT#SIMDET=<mode> Set
AT#SIMDET? Read
AT#SIMDET=? Test
ParametersandValues
<mode> SIMdetectionmode.
0 IgnoreSIMINpinandsimulatethestatus‘SIMNotInserted’.
1 IgnoreSIMINpinandsimulatethestatus‘SIMInserted’.
2 AutomaticSIMdetectionthroughSIMINpin.Default:2.
GSMContextDefinition#GSMCONT
SetcommandspecifiescontextparametervaluesfortheonlyGSMcontext,identifiedbythe(local)context
identificationparameter0.
ReadcommandreturnsthecurrentsettingsfortheGSMcontext,ifdefined,intheformat: