Specifications

CUSTOMATCOMMANDS


183 HSPA+ATCommandsReferenceGuide

ReadcommandreportswhethertheENSfunctioniscurrentlyenabledornot,intheformat:
#ENS:<mode>
Where<mode>representsvaluesasdescribedintheParametersandValuessection.
Testcommandreportstheavailablerangeofvaluesforparameter<mode>.
Syntax
Command Commandtype
AT#ENS=[<mode>] Set
AT#ENS? Read
AT#ENS=? Test
ParametersandValues
<mode> 
0 DisableENSfunction.Default:0.
1
EnableENSfunction.IfAT#ENS=1isissued,thefollowingvaluesareautomatically
set:
Ateverynextpower‐up.BandGSM850andPCSenabled(AT#BND=3)
Onlyatnextpower‐up.AutomaticBandSelectionenabled(AT#AUTOBND=2)only
iftheprevioussettingwasequaltoAT#AUT
OBND=0
Note:Thenewsettingisavailableafternextpower‐up.
Note:If‘FourBand’AutomaticBandSelectionisactivated(AT#AUTOBND=2),at
power‐upthevaluereturnedbyAT#BND?mightnotbe3ifENSfunctionis
enabled.
SelectBand#BND
SetcommandselectsthecurrentGSMandUMTSbands.ThiscommandonlyworksifAT#AUTOBNDissettovalue
of0or1.
Readcommandreturnsthecurrentselectedbandintheformat:
#BND:<band>,<UMTSband>
Testcommandreturnsthesupportedrangeofvaluesofparameters<band>and<UM
TSband>.
Syntax
Command Commandtype
AT#BND=[<band>[,<UMTSband>]] Set
AT#BND? Read
AT#BND=? Test