Specifications


CUSTOMATCOMMANDS

HSPA+ATCommandsReferenceGuide 176

Syntax
Command Commandtype
AT#NWEN=[<en>] Set
AT#NWEN? Read
AT#NWEN=? Test
ParametersandValues
<en> 
0 Disablesunsolicitedindicationofemergencynumberupdate.Default:0 .
1 Enablesunsolicitedindicationofemergencynumberupdate.
#NWEN:<type> 
1 NumberlistupdatefrominternalME.
2 NumberlistupdatefromSIM.
3 Numberlistupdatefromnetwork.
PacketServiceNetworkType#PSNT
Setcommandenablesordisablesunsolicitedresultcodeforpacketservicenetworktype(PSNT).
Readcommandreportsthe<mode>and<nt>valuesintheformat:
#PSNT:<mode>,<nt>s
where
<mode> 
0 PSNTunsolicitedresultcodedisabled.
1 PSNTunsolicitedresultcodeenabled.
<nt> Networktype.
0 GPRSnetwork.
1 EGPRSnetwork.
2 WCDMAnetwork.
3 HSDPAnetwork.
Note:WhenthetypeofnetworkisHSPA,theindicationisvalidduringtraffic.Itis
notvalidinidlebecauseitdependsonnetw
orkbroadcastparameters
4 Unknownornotregistered.
Testcommandreportstherangefortheparameter<mode>.
Syntax
Command Commandtype
AT#PSNT=[<mode>] Set
AT#PSNT? Read
AT#PSNT=? Test
ParametersandValues
<mode> 
0 DisablePSNTunsolicitedresultcode.Default:0.