Specifications


CUSTOMATCOMMANDS

HSPA+ATCommandsReferenceGuide 152

Syntax
Command Commandtype
AT#PCT Execute
AT#PCT=? Test
Notes
 When+CPINisintheREADYstatethen#PCTisnotapplicable.
ExtendedReset#Z
SetcommandloadsbothbasesectionandextendedsectionofthespecifieduserprofilestoredwithAT&Wand
selectedwithAT&P.
Testcommandtestsforcommandexistence.
Syntax
Command Commandtype
AT#Z=<profile> Set
AT#Z=? Test
ParametersandValues
<profile> 
0 Userprofile0.
1 Userprofile1.
PeriodicReset#ENHRST
Setcommandenablesordisablestheunitresetafter<delay>minutes.
Readcommandreportsthecurrentparametersettingsfor#EHNRSTcommandintheformat:
#EHNRST:<mod>[,<delay>,<remainTime>]
<remainTime>‐timeremainingbeforenextreset
Testcommandreportssupportedrangeofvaluesfor<mod>and<delay>.
Syntax
Command Commandtype
AT#ENHRST=<mod>[,<delay>] Set
AT#ENHRST? Read
AT#ENHRST=? Test
ParametersandValues
<mod> 
0 Disablestheunitreset.Default:0.
1 Enablestheunitresetonetime.
2 Enablestheperiodicunitreset.
<delay> Timeintervalafterwhichtheunitreboots.Numericvalueinminutes.