Specifications


3GPPTS27.007ATCOMMANDS

HSPA+ATCommandsReferenceGuide 106

+CGQREQ: <cid>,<precedence>,<delay>,<reliability>,<peak>,
<mean>[<CR><LF>+CGQREQ: <cid>,<precedence>,
<delay>,<reliability>,<peak>,<mean>[…]]
IfnoPDPcontextisdefined,ithas noeffectandOKresultcodeisreturned.
TestcommandreturnsasacompoundvaluethetypeofthecurrentPDPcontextandthesupportedvaluesforthe
subparametersintheformat:
+CGQREQ:<PDP_Type>,(listofsupported<precedence>s),
(listofsupported<delay>s),(listofsupported<rel
iability>s),
(listofsupported<peak>s),(listofsupported<mean>s)
Note:Onlythe“IP”<PDP_Type>iscurrentlysupported.
Syntax
Command Commandtype
AT+CGQREQ=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>
[,<mean>]]]]]]

AT+CGQREQ? Read
AT+CGQREQ=?
ParametersandValues
<cid> PDPcontextidentification.See+CGDCONTcommand.
<precedence> Precedenceclass.
<delay> Delayclass.
<reliability> Reliabilityclass.
<peak> Peakthroughputclass.
<mean> Meanthroughputclass.
 Note:Ifavalueisomittedforaparticularclassthenthisclassisnotchecked.
Notes
 AspecialformoftheSetcommand,+CGQREQ=<cid>causestherequestedprofileforcontextnumber<cid>to
becomeundefined.
 Setcommandcanmodifythe3GQoSaccordingto3GPP23.107.See+CGEQREQ.
 Reference:3GPPTS27.007;GSM03.60.
Examples
AT+CGQREQ?
+CGQREQ: 1,0,0,3,0,0
OK
AT+CGQREQ=1,0,0,3,0,0
OK
AT+CGQREQ=?