Specifications

3GPPTS27.007ATCOMMANDS


103 HSPA+ATCommandsReferenceGuide


<stat> Registrationstatus.
<lac>
Locationareacodeinhexadecimalformat.Forexample"00C3"equals195in
decimal.
<ci> CellIDinhexadecimalformat.
<AcT> Accesstechnologyoftheregisterednetwork:
0 GSM
2 UTRAN
<rac> Stringtype,onebyteroutingareacodeinhexadecimalformat.
Note:<lac>,<Ci>,<AcT>and<rac>arereportedonlyif<mode>=2andthemobileisregisteredonsomenetwork
cell.
Notes
 Reference:3GPPTS27.007.
DefinePDPContext+CGDCONT
SetcommandspecifiesPDPcontextparametervaluesforaPDPcontextidentifiedbythe(local)context
identificationparameter,<cid>.
Readcommandreturnsthecurrentsettingsforeachdefinedcontextintheformat:
+CGDCONT:<cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,
<h_comp>[,<pd1>[,…[,pdN]]][<CR><LF>+CGDCONT:<cid>,
<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h_comp>
[,<pd1>[,…[,pdN]]][…]]
Testcommandreturnsvaluessupportedasacompoundvalue.
Syntax
Command Commandtype
AT+CGDCONT=[<cid>[,<PDP_type>[,<APN>[,<PDP_addr>[,<d_comp>
[,<h_comp>[,<pd1>[,…[,pdN]]]]]]]]]

AT+CGDCONT? Read
AT+CGDCONT=?
ParametersandValues
<cid>
PDPContextIdentifier.NumericparameterthatspecifiesaPDPcontext
definition.
1‐max ThevalueofmaxisreturnedbytheTestcommand.
Note:AspecialformoftheSetcommand,+CGDCONT=<cid>,causesthevalues
forcontextnumber<cid>tobecomeundefined.
<PDP_type>
PacketDataProtocoltype.Stringparameterthatspecifiesthety
peofpacketdata
protocol
"IP" InternetProtocol
<APN>
AccessPointName.Stringparameterthatisalogicalnameusedtoselectthe
GGSNortheexternalpacketdatanetwork.Ifthevalueisempty(“”)oromitted,