User guide

Chapter 3 - Software Loading and Configuration
MTASR3-200 20
15. The following message displays.
Click OK to proceed.
16. The Writing Setup dialog box (with the current date and the file size in bytes) displays as the
setup configuration is written to the RASFinder.
17. Next, the Rebooting dialog box displays.
18. Check to ensure that the Fail LED on the RASFinder goes Off after the download is complete
and the RASFinder is rebooted (the Rebooting dialog box goes away). This may take several
minutes as the RASFinder reboots.
19. If you are going to establish your remote user profile database using the proprietary Remote
User Database utility, proceed to the next section, or if you are going to use a Radius server for
centralized network security, proceed to the section entitled, Setting Up Remote Access Dial In
User Server (RADIUS).
For Routing, proceed to the last section (Final Routing Setup) in this chapter to set up the
RASFinder as a router.