User guide

Chapter 1 - Introduction and Description
MTASR3-200 10
Specifications
The RASFinder conforms to the following specifications:
• Routing Protocols - IP and IPX, and bridging for all others
• Ethernet LAN Interface - 10Base-T (twisted pair)
• WAN Interface - 3 async (RS232) Links with RJ-11 jacks
• Command Port - 19.2 Kbps Asynchronous
• Two 70-nanosecond 4 MB SIMMs (8 MB, total)
(RAM is expandable to a maximum of 32 MB)
Caution: SIMM speed and size cannot be mixed.
• 1 MB of Flash memory (on two PROMs)
Ethernet Port
• One Ethernet Interface - 10Base-T (twisted pair) RJ-45 connector.
Command Port
• Single 19.2 Kbps asynchronous Command Port using a short RJ-45-to-DB9 cable with a
DB9 female connector.
WAN Links
• Three internal V.90 modems* with MultiLink Point-to-Point Protocol for a bandwidth of up to
168 Kbps.
Electrical/Physical
• Voltage - 100 to 250 VAC, 50/60 Hz
• Input Voltage - 5Vdc, 1.4A
• Power Consumption - 10 Watts
• Dimensions - 1.625" high x 6" wide x 9" deep
5.63 cm high x 22.34 cm wide x 33.51 cm deep
• Weight - 2 pounds (0.92 kg)
Requirement
• PC with Windows 98/2000/XP or Windows NT, and one available serial COM port to connect
to the Command Port of the RASFinder
* Though this modem is capable of 56 Kbps download performance, line impairments, public
telephone infrastructure and other external technological factors currently prevent maximum 56
Kbps connections.