User guide

Chapter 5 - Remote Configuration and Management
MTASR2-203 49
Router Management
The Router Management Menu provides five functional options in addition to the option of escaping
and closing the Telnet session.
Dial-Out
The Dial-out option (Option 1) on the Router Management Menu enables a Telnet user to configure the
WAN port for a dial-out session. The default configuration of 115200 bps, 8N1 can be used for the dial-
out session, or the user can specify each parameter for the port (e.g., the baud rate, the number of
data bits, parity, or the number of stop bits). When the connection is established, anything entered on
the keyboard is immediately presented to the WAN port. When the dial-out session is over, the WAN
port reverts to its original configuration.
Router Management
The Router Management option (Option 2) enables a Telnet user to view router statistics, the User
List, and system information. Another option enables the remote user to Reset the router.
Router Configuration
The Router Configuration option (Option 3) enables a Telnet user to view and change parameters on
the protocol stacks, high or low level device drivers, enable or disable the supported servers, or view
system information.
WAN Device Configuration
The WAN Device Configuration option (Option 4) allows a remote user (a Telnet client) to gain access
to the WAN port (if available) on the RouteFinder.
Remote User Database
The Remote User Database option (Option 5) allows a remote user to add user information such as
Name and Password, callback information, and which protocol stacks to enable or disable.