User guide

Chapter 5 - Remote Configuration and Management
MTASR2-203 45
Verify that the Communication Type field is set for COM port and the Select Port field is set for
the COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of the
remote RouteFinder .
If your Modem Initialization String, Initialization Response, or Connect Response values are
different from the defaults in the dialog box, refer to your modem user documentation and change
the default values to match your modem.
Click OK when you are satisfied with all your selections.
6. Run the RouteFinder Configuration program. Click Start | Programs | RouteFinder | RouteFinder
Configuration. or double click the RouteFinder Configuration icon in the RouteFinder program
group.
7. The Dialing Router dialog box is displayed while software is dialing the remote RouteFinder.
8. Next, the Reading Setup dialog box is displayed.
9. The Router Setup dialog box is displayed. This is the dialog box of the remote RouteFinder. Refer
to Chapter 4 for a description of each dialog box. For a detailed description of each field within a
dialog box, refer to the on-line Help provided within your RouteFinder software.
10. After you have changed the configuration of the remote RouteFinder, click the Download Setup
button to update the configuration. The remote RouteFinder will be brought down, the new
configuration written to the unit, and the unit will reboot.
11. Click the Exit button when the downloading is complete.
12. The Hangup connection with Router? dialog box is displayed.
Click Yes to disconnect the phone connection to the remote site.
13. If the same telephone number is not going to be used again in the immediate future, you may
want to remove it from the Port Setup dialog box.
14. At the remote site, reconnect the RouteFinder to the serial port of the PC and from the Program
Manager screen click the Router Configuration icon to verify that the RouteFinder is running.