User guide

RouteFinderT1 User Guide
MTASR2-20318
Introduction
Before you start loading your software, you will need to contact your local telco to find out how your T1
service is being provided. The software loading procedure does not provide every screen or option in the
process of installing the RouteFinder software. It is assumed that a technical person with a thorough
knowledge of Windows and the software loading process is doing the installation.
Before You Start Loading Your Software
Contact your local telephone company that is providing your T1 service and ask for the folllowing: line
coding (AMI or B8ZS), frame format (D4 or ESF), and available bandwidth (full T1 is 24 DSOs) or number of
DSOs and which DSO assignments, if FT1. Record your provisioning information below:
Line Code: AMI/B8ZS __________________________________________
Framing Format: D4/ESF _______________________________________
Available bandwidth: Full T1 (24 DSOs), or _________________________
Number of DSOs and which DSO assignments, if T1. ________________
Installing your Software
1. Insert the RouteFinder CD-ROM into a CD-ROM drive on your local PC. The CD-ROM starts
automatically (It may take 10 to 20 seconds for the Multi-Tech Installation CD screen to appear).
If the Multi-Tech Installation CD Screen does not appear automatically, click My Computer, then right-
click the CD-ROM drive icon and click Autorun.
2. When the Multi-Tech Installation CD Screen appears, click the Install Software icon.
3. Windows prepares the Install Shield and then displays the Welcome Screen dialog box.
Press Enter or click Next > to continue.