User guide

RouteFinder MTASR1-100 Quick Start Guide
4
Introduction
Welcome to Multi-Tech's new RouteFinder™, model MTASR1-100,
an IP/IPX router for interconnecting LANs using switched or
dedicated wide area telecommunications links. The MTASR1-100
provides IP and IPX routing and Media Access Control (MAC)
layer bridging for all other protocols over its WAN ports. It features
a 10Base-T or AUI port for local LAN connection, Command Port
for configuration, and an RS232/V.35 port for asynchronous or
synchronous remote WAN connection using standard point-to-
point protocol (PPP). The configurable WAN port operates with a
compatible communication device operating at up to 115 Kbps
(async) or T1 (sync) speeds. These devices include asynchronous
and synchronous modems, ISDN terminal adapters and DDS,
Switched 56, Fractional T1, and T1 DSUs. System management is
provided through the command port using bundles Windows
software that provides easy-to-use configuration menus.
Figure 1. RouteFinder MTASR1-100