User guide

RouteFinder MTASR1-100 Quick Start Guide

A list of items will appear in a panel under the label The

following network components are installed:.

3. If your network protocol is installed, continue with the

next step, Select the Primary Network Logon.

If your network protocol is not installed, refer to

Loading your Protocol procedure in this section.

After installing the protocol, reboot your computer. Your

computer may ask you if you want to restart it now. Click

the Yes button.

4. Select the Primary Network Logon. In the Primary

Network Logon drop-down list, select your network client.

5. Exit the software. Click the OK button at the bottom of the

window.