User guide

Software

25. If the WAN port is connected to a synchronous device,

select Synchronous; the default uses an external clock in

the synchronous device. If you are using the

RouteFinder’s internal clock, select Internal Clock and

select the appropriate Clock Speed from the pull-down

list.

If the WAN port is connected to an asynchronous device,

click Asynchronous, then click the Direct Connect/

Leased Line option to disable it; the Modem Type and

Dial Number fields become active. Select your external

modem from the pull-down list. The Speed can either be

left at the default 115200 value or set to the maximum

capability of your modem.

If the WAN port is being set up to make a call, enter the

phone number to be dialed in the Dial Number field.

If the WAN port is being set up to answer a call, click the

Answering option (the Dial Number field becomes

inactive).

26. Click OK when you are satisfied with your selections.

Note: If necessary, the WAN port can be configured

further, after completion of software installation, by clicking

Router Configuration and then clicking the WAN button on

the Router Setup screen.

27. The Checking Router dialog box is displayed.