User guide

RouteFinder MTASR1-100 Quick Start Guide
16
The WAN network number has to be assigned by the
network administrator and must be unique throughout the
entire internetwork.
Note: The WAN port does not have the capability of
learning the network number, unlike the LAN port (i.e., the
WAN port does not have a file server).
17. Click OK when you are satisfied with your selections.
18. If you disabled IPX and then clicked OK from the IPX
Protocol Setup dialog box (step 13), the IP Protocol
Default Setup dialog box is displayed.
19. To change the IP parameters, proceed to the next step.
Otherwise, click OK to display the WAN Ports Default
Setup screen and proceed to step 24.
20. The default Ethernet IP Address has to be changed to your
unique LAN address. Therefore, start by assigning an
acceptable unique IP address to the Ethernet port.
21. Change the default Subnet Mask and Frame Type to the
values you have assigned to your LAN port.
22. The default WAN Address has to be changed to your
unique WAN address. Assign an acceptable unique WAN
port address in the Address field.
23. Change the default IP Mask and Remote Address for the
WAN port to the value you have assigned to your WAN.
Click OK when you are satisfied with all your selections.
24. The WAN Ports Default Setup screen is displayed.