User guide

Software
RouteFinder Software
The following software loading procedure does not provide
every screen or option. It is assumed that a technical person
with a thorough knowledge of Windows and the software
loading process is doing the installation.
Loading your Software
1. Run Windows on the PC that is connected to the
RouteFinder’s Command Port.
2. Insert the RouteFinder 3.00 Disk 1 into the disk drive on
the PC that is connected to the RouteFinder.
3. Win3.1 users - access Run by clicking the File menu in
the Program Manager, then click Run. In the Run dialog
box, type a:\setup.exe or b:\setup.exe (depending on the
letter of your floppy disk drive) in the Command Line field
and then click OK.
Win95/NT users - click the Start button, then click Run. In
the Run dialog box click the down arrow and choose
a:\setup or b:\setup (depending on the letter of your
floppy disk drive), then click OK.
4. The Welcome screen is displayed.
Press Enter or click Next> to continue.
11