User guide

RouteFinder MTASR1-100 Quick Start Guide
5. Pry the shunt out of the default RS232 position, then insert
the shunt in the V.35 position for the WAN link. See Figure
5.
6. Slide the base back into the cabinet with the LEDs going
toward the front and the back side grounding tabs pressing
against the side of the cabinet.
7. Turn the unit upside down and replace the cabinet
mounting screw that was removed in step 2. See Figure 6.
Cabinet
Mounting
Screw
®
ETHERNET FAIL
POWER
RCV
XMT
COL
LNK
RCV
XMT
CTS
RTS
ERR
PWR
T e c h
Systems
WAN LINK
CD
V35
Figure 6. Replacing Cabinet Mounting Screw
8. Turn the unit right side up and return to Table 1 to connect
the cables.
10