Owner`s manual
70-IWay Hopper
Troubleshooting
* In Windows 95, if the Use Country Code and Area Code box is checked in the Prop-
erties window for dial-up connection, the bundling modifier (i.e., &, + or !) is removed
from the dialing string when the user attempts to make a connection. The solution is to not
check the Use Country Code and Area Code box, or to simply add the bundling dial
modifier to the phone number at the time of connection.
The MTA128ST Disconnects While Online
4 Check for loose connections between the MTA128ST and the computer, the
ISDN jack, and AC power.
4 The problem may have originated at the other end of the line. Try again.
4 If you were online with a BBS or online service, it may have hung up on you
because of lack of activity on your part or because you exceeded your time limit
for the day. Try again.
The MTA128ST Cannot Connect When Answering
4 Autoanswer may be disabled. Turn on autoanswer in your data communications
program, or send the command ATS0=1 to your MTA128ST in terminal mode.
*: If the user wishes to accept calls while DTR is low, the MTA128ST must be
configured to ignore DTR. This is accomplished by entering AT&D0<cr>. With
this configuration, the MTA128ST is able to accept calls while DTR is low. If this
configuration setting is not made, the TA rejects incoming calls until DTR is high
while the calls comes in.
File Transfer Appears Slower Than It Should Be
4 If you presently have a Universal Asynchronous Receiver/Transmitter (UART)
that is compromising data throughputs, we recommend that it be replaced with
a special I/O card.
4 If you are running under Windows 3.1 and have a 16550AFN UART, you must
replace the Windows serial driver, COMM.DRV, to take full advantage of the
UARTs speed.