Specifications

Part 1 - Universal Socket Connectivity Chapter 1 – Universal Socket Connectivity
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342P) 52
Japan Requirements
These devices conform to (JATE) Japan Approval Institute for Telecommunications Equipment:
MT5692SMI – JATE Approval A09-0123001
MT9234SMI – JATE Approval AD06-0220001
Important Note: SocketModems are approved for product development in Japan only if they are removable
from the manufactured product. The SocketModem must not be soldered into place.
Japan requires that your manufactured product documentation include SocketModem installation and removal
instructions as well as connection to the PSTN network. The following text provides general steps to follow.
Installation of the SocketModem into Your Manufactured Product
1. If applicable, disconnect any power cord and peripherals you may have attached to your manufactured
product.
2. Place the SocketModem on the board of your product. Be sure to match the pins on the SocketModem with
the correct orientation on your board.
3. Be sure that the SocketModem is securely fastened to board so that it cannot come loose while handling or
during shipping. Some examples of fasteners include nylon screws, tie wraps, etc. Remember that you
cannot solder the SocketModem in place.
4. Put the cover on your product and connect the power and peripherals.
Removal of the SocketModem from Your Manufactured Product
1. Back up the current configuration of your manufactured product if you want to save it.
2. Record any information not stored in the configuration that you may want to reference.
3. Disconnect any power cord and peripherals from your manufactured product.
4. Remove the cover from your product.
5. To remove the SocketModem, gently lift the SocketModem upwards while holding the board in place.
Connecting to the PSTN Network
For connection to a PSTN network, see the Tip and Ring Interface section in each analog SocketModem
chapter.
Other Countries
The above country-specific examples do not cover all countries with specific regulations; they have been
included to show you how each country may differ. If you have trouble determining your own country's
requirements, check with Multi-Tech's Technical Support for assistance.