Specifications

PART 4 – Embedded Device Servers Chapter 14 – SocketWireless Bluetooth (MTS2BTSMI)
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342P) 196
Technical Specifications
The SocketWireless Bluetooth (MTS2BTSMI) meets the following specifications:
Category
Description
Standard
Class 1 Bluetooth V2.0 compliant
Note: For Bluetooth protocol V2.0, the circuit board I/O pin 7 now controls flow control.
In V1.2, circuit board I/O pin 3 controlled flow control. V2.0 now supports multipoint
connections.
Frequency Range
2402 to 2480 MHz (2.402 to 2.480 GHz)
Data Format
For Serial Interface - Asynchronous
Serial Speeds
Supports speeds from 1200 bps to 920K bps
Flow Control
Hardware
Output Level (Class 1)
20dBm maximum
Modes of Operation
Inquiry, Idle, Data, Fast Data, Park, Sniff, Command, Master, Slave
Device Profiles
Serial Port (SPP), Dial-up Network (DUN)
Buffer Serial 50 bytes
RF
50-byte RX buffer
Weight
0.6 oz. (0.017 kg.)
Power Measurements
See Power Measurements table later in this chapter.
Operating Temperature
-40
°
to +70
°
C
Storage Temperature
-40
°
to +85
°
C
Humidity
20% to 90% (non-condensing)
Operating Voltage
5VDC or 3.3VDC
Minimum and Maximum Voltage: 3.3VDC ± 0.1V & < 10mVp-p noise
5VDC
±
0.1V & < 10mVp-p noise
Compliance EMC Compliance
FCC Part 15.247:2004 (subpart C)
EN 301 489-1 V1.4.1 (2002-08)
Safety Compliance
UL 60950
cUL 60950
EN 60950
AS/NZS 60950:2000
Warranty
Two years