Specifications

Part 4 – Embedded Device Servers Chapter 13 – SocketWireless Wi-Fi (MT810SWM-IP)
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342P) 193
Application Notes
LED Interface
The LED signal is used to indicate the working status of the SocketModem.
LED 1 – Heartbeat LED
LED 1 Signal
Heartbeat LED
Blinking
The unit is functioning normally
Off
No power to the unit
Default Power Up Settings
Baud Rate = 115200 bps
Data Bits = 8 bits
Parity = None
Stop bits = 1 bit
Hardware Flow Control RTS/CTS = Disabled
Note:
See Chapter 1 for Antenna System details. Note that the cable for the Wi-Fi SocketModem has a reverse polarity
SMA plug.