Specifications

PART 4 – Embedded Device Servers Chapter 12 – SocketEthernet IP (MT100SEM-IP)
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342P) 185
Recommended Parts
Recommended Capacitors for a Non-Isolated Design:
Manufacturer – NIC Components Corp.
Part Number – NMC0603NPO150J50TRPF
Recommended Safety Rated Capacitors for an Isolated Design: The recommended capacitors are Y2 rated and
meet supplementary isolation at 240Vac along with the required creepages and clearances.
Manufacture – NOVACAP
Part Number – ES2211N(value)K502NXT
Recommended Resistor: The resistors are 75 ohms 1/8 watt.
Recommended Ethernet Modular Jack: The recommended jack is an eight contact, eight position, unshielded
and ungrounded connector that will maintain the need isolation and spacing requirements. A shielded and
grounded connector may be used, but special consideration must be made for the isolation and spacing
requirements.
Manufacture – Stewart Connector Systems
Part Number – SS-6488-NF-K1
Note: These SocketEthernet parts are RoHS compliant.