Specifications

PART 3 – Analog SocketModems Chapter 10 – SocketModem (MT5692SMI)
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342P) 152
Important – Tooling Holes for Mounting
Hardware on the Board
It is recommended that nylon hardware be used if the SocketModems are to be mounted on the board using the
two tooling holes on the board due to possible traces and vias around the tooling holes.
For the MT5692SMI Analog SocketModem:
#2 or M2 for hardware should be used for mounting the analog modem on the board when the tooling hole
diameter on the board is .093.
#4 or M3 for hardware should be used for mounting the analog modem on the board when the tooling hole
diameter on the board is .128.
See the Mechanical Drawings for MT5692SMI on the following four pages.