Specifications

PART 2 – Cellular SocketModems Chapter 8 – SocketModemCell & iCell EV-DO (EV1)
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342P) 123
Important – Tooling Holes for Mounting Hardware
on the Board
It is recommended that nylon hardware be used if the SocketModem is to be mounted on the board using the two
tooling holes on the board due to possible traces and vias around the tooling holes.
For Cellular SocketModems:
#4 or M2/M3 hardware should be used for mounting this cellular SocketModem to the board.
See the Mechanical Drawings for MTSMC-EV1 on the following pages.