Specifications

PART 2 Cellular SocketModems Chapter 7 SocketModem Cell & iCell HSPA (H3)
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342P) 110
Important Tooling Holes for Mounting Hardware
on the Board
It is recommended that nylon hardware be used if the SocketModem is to be mounted on the board using the two
tooling holes on the board due to possible traces and vias around the tooling holes.
For Cellular SocketModems:
#4 or M2/M3 hardware should be used for mounting this cellular SocketModem to the board.
See the Mechanical Drawings for MTSMC-H3 on the following pages.